-----BEGIN PGP SIGNED MESSAGE-----
AUSCERT External Security Bulletin Redistribution
ESB-2005.0667 -- HP Security Bulletin HPSBUX01218
SSRT4702 rev.0 - HP-UX running Veritas 3.3/3.5 unauthorized data access
29 August 2005
AusCERT Security Bulletin Summary
Product: Veritas 3.3/3.5
Operating System: HP-UX
Impact: Access Privileged Data
Access: Existing Account
- --------------------------BEGIN INCLUDED TEXT--------------------
- -----BEGIN PGP SIGNED MESSAGE-----
HP SECURITY BULLETIN
HPSBUX01218 REVISION: 0
SSRT4702 rev.0 - HP-UX running Veritas 3.3/3.5 unauthorized
The information in this Security Bulletin should be acted upon
as soon as possible.
24 August 2005
POTENTIAL SECURITY IMPACT:
Local unauthorized access to data by an authorized user.
HP Software Security Response Team
A potential vulnerability has been identified in HP-UX running the
Veritas File System (VxFS) that may allow a local authorized user
access to unauthorized data.
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP-UX B.11.00 running VxFS 3.3
HP-UX B.11.11 running VxFS 3.3
HP-UX B.11.11 running VxFS 3.5
HP-UX B.11.23 running VxFS 3.5
Note: If an upgrade from HP-UX 11.11 VxFS 3.3 to VxFS 3.5 is
planned please be aware of the following:
Upgrading HP-UX B.11.11 from VxFS 3.3 to VxFS 3.5 will leave
VxFS 3.3 on the system but inactive. Since VxFS 3.3 could be
reactivated it is important to patch VxFS 3.3 before upgrading
to VxFs 3.5. Otherwise reactivating VxFS 3.3 would reintroduce
the potential vulnerability.
Note: To determine if a system has an affected version,
search the output of "swlist -a revision -l fileset"
for an affected fileset. Then determine if the
recommended patch or update is installed.
action: install PHKL_33285 or subsequent
action: install PHKL_29896 or subsequent
action: install PHKL_32669 or subsequent
action: install PHKL_31500 or subsequent
END AFFECTED VERSIONS
HP is providing the following patches that can be retrieved from
PHKL_33285 or subsequent B.11.00 for VxFS 3.3
PHKL_32669 or subsequent B.11.11 for VxFS 3.3
PHKL_29896 or subsequent B.11.11 for VxFS 3.5
PHKL_31500 or subsequent B.11.23 for VxFS 3.5
MANUAL ACTIONS: No
BULLETIN REVISION HISTORY:
Revision 0 - 22 August 2005
HP-UX SPECIFIC SECURITY BULLETINS*: Security Patch Check revision
B.02.00 analyzes all HP-issued Security Bulletins to provide a
subset of recommended actions that potentially affect a specific
For more information:
SUPPORT: For further information, contact normal HP Services
REPORT: To report a potential security vulnerability with any HP
supported product, send Email to: email@example.com. It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To obtain the security-alert PGP key please send an
e-mail message to firstname.lastname@example.org with the Subject of
'get key' (no quotes).
SUBSCRIBE: To initiate a subscription to receive future HP
Security Bulletins via Email:
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your IRTC security bulletins and patches
- check ALL categories for which alerts are required and
Under Step2: your IRTC operating systems
- verify your operating system selections are checked and
To update an existing subscription:
Log in on the web page
Subscriber's choice for Business: sign-in.
On the Web page:
Subscriber's Choice: your profile summary
- use Edit Profile to update appropriate sections.
To review previously published Security Bulletins visit:
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters of the
GN = HP General SW,
MA = HP Management Agents,
MI = Misc. 3rd party SW,
MP = HP MPE/iX,
NS = HP NonStop Servers,
OV = HP OpenVMS,
PI = HP Printing & Imaging,
ST = HP Storage SW,
TL = HP Trusted Linux,
TU = HP Tru64 UNIX,
UX = HP-UX,
VV = HP Virtual Vault
System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.
"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently, HP
will not be responsible for any damages resulting from user's use
or disregard of the information provided in this Bulletin. To the
extent permitted by law, HP disclaims all warranties, either
express or implied, including the warranties of merchantability
and fitness for a particular purpose, title and non-infringement."
(c)Copyright 2005 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP nor its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
- -----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
- -----END PGP SIGNATURE-----
- --------------------------END INCLUDED TEXT--------------------
You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to email@example.com
and we will forward your request to the appropriate person.
NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members. As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.
NOTE: This is only the original release of the security bulletin. It may
not be updated when updates to the original are made. If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.
Contact information for the authors of the original document is included
in the Security Bulletin above. If you have any questions or need further
information, please contact them directly.
Previous advisories and external security bulletins can be retrieved from:
If you believe that your computer system has been compromised or attacked in
any way, we encourage you to let us know by completing the secure National IT
Incident Reporting Form at:
Australian Computer Emergency Response Team
The University of Queensland
Internet Email: firstname.lastname@example.org
Facsimile: (07) 3365 7031
Telephone: (07) 3365 4417 (International: +61 7 3365 4417)
AusCERT personnel answer during Queensland business hours
which are GMT+10:00 (AEST).
On call after hours for member emergencies only.
-----BEGIN PGP SIGNATURE-----
-----END PGP SIGNATURE-----