Published:
20 December 2007
Protect yourself against future threats.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
===========================================================================
AUSCERT External Security Bulletin Redistribution
ESB-2007.1034 -- [Cisco]
Application Inspection Vulnerability in Cisco Firewall Services Module
20 December 2007
===========================================================================
AusCERT Security Bulletin Summary
---------------------------------
Product: Cisco Firewall Services Module
Publisher: Cisco Systems
Platform: Cisco Catalyst 6500 Series Switches
Cisco 7600 Series Routers
Impact: Denial of Service
Access: Remote/Unauthenticated
CVE Names: CVE-2007-5584
Original Bulletin:
http://www.cisco.com/warp/public/707/cisco-sa-20071219-fwsm.shtml
- --------------------------BEGIN INCLUDED TEXT--------------------
- -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Cisco Security Advisory: Application Inspection Vulnerability in Cisco
Firewall Services Module
Advisory ID: cisco-sa-20071219-fwsm
============
Revision 1.0
============
Last Updated 2007 December 19 1600 UTC (GMT)
For Public Release 2007 December 19 1600 UTC (GMT)
Summary
=======
A vulnerability exists in the Cisco Firewall Services Module (FWSM)
- - - - a high-speed, integrated firewall module for Cisco Catalyst 6500
switches and Cisco 7600 Series routers, that may result in a reload
of the FWSM. The only affected FWSM System Software Version is
3.2(3).
There are no known instances of intentional exploitation of this
issue. However, Cisco has observed data streams that appear to be
unintentionally triggering this vulnerability.
Common Vulnerabilities and Exposures (CVE) identifier CVE-2007-5584
has been assigned to this vulnerability.
Cisco will release free software updates that address this
vulnerability.
A workaround that mitigates this vulnerability is available.
This advisory is posted at
http://www.cisco.com/warp/public/707/cisco-sa-20071219-fwsm.shtml
Affected Products
=================
Vulnerable Products
+------------------
The FWSM is vulnerable if running System Software version 3.2(3).
To determine if the FWSM is vulnerable, issue the "show module"
command-line interface (CLI) command from Cisco IOS or Cisco CatOS
to identify what modules and sub-modules are installed in the
system.
The following example shows a system with a Firewall Service Module
(WS-SVC-FWM-1) installed in slot 4.
switch#show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ----------------- -----------
1 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SAxxxxxxxxx
4 6 Firewall Module WS-SVC-FWM-1 SAxxxxxxxxx
5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAxxxxxxxxx
6 2 Supervisor Engine 720 (Hot) WS-SUP720-BASE SAxxxxxxxxx
After locating the correct slot, issue the show module <slot number>
command to identify the software version that is running.
switch#show module 4
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ----------------- -----------
4 6 Firewall Module WS-SVC-FWM-1 SAxxxxxxxxx
Mod MAC addresses Hw Fw Sw Status
--- --------------------------------- ------ ------------ ------------ -------
4 0003.e4xx.xxxx to 0003.e4xx.xxxx 3.0 7.2(1) 3.2(3) Ok
The preceding example shows that the FWSM is running version 3.2(3)
as indicated by the column under "Sw" above.
Note: Recent versions of Cisco IOS will show the software version of
each module in the output from the show module command; therefore,
executing the show module <slot number> command is not necessary.
Alternatively, the information can also be obtained directly from the
FWSM through the show version command as seen in the following
example.
FWSM#show version
FWSM Firewall Version 3.2(3)
Customers who use the Cisco Adaptive Security Device Manager (ASDM)
to manage their devices can find the version of the software displayed
in the table in the login window or in the upper left corner of the
ASDM window. The version notation is similar to the following example.
FWSM Version: 3.2(3)
Products Confirmed Not Vulnerable
+--------------------------------
* FWSM System Software versions 3.2(2) and earlier.
* FWSM System Software versions 3.1(x).
* FWSM System Software versions 1.x(y) and 2.x(y).
* The Cisco PIX 500 Series Security Appliance (PIX)
* The Cisco 5500 Series Adaptive Security Appliance (ASA).
No other Cisco products are currently known to be affected by this
vulnerability.
Details
=======
A vulnerability exists in the processing of data in the
control-plane path with Layer 7 Application Inspections, that may
result in a reload of the FWSM. The vulnerability can be triggered
with standard network traffic, which is passed through the
Application Layer Protocol Inspection process.
The only FWSM release affected by this vulnerability is FWSM System
Software version 3.2(3).
This vulnerability is documented in Cisco bug ID CSCsl08519.
Vulnerability Scoring Details
=============================
Cisco has provided scores for the vulnerabilities in this advisory
based on the Common Vulnerability Scoring System (CVSS). The CVSS
scoring in this Security Advisory is done in accordance with CVSS
version 2.0.
CVSS is a standards-based scoring method that conveys vulnerability
severity and helps determine urgency and priority of response.
Cisco has provided a base and temporal score. Customers can then
compute environmental scores to assist in determining the impact of
the vulnerability in individual networks.
Cisco has provided an FAQ to answer additional questions regarding
CVSS at:
http://www.cisco.com/web/about/security/intelligence/cvss-qandas.html
Cisco has also provided a CVSS calculator to help compute the
environmental impact for individual networks at:
http://intellishield.cisco.com/security/alertmanager/cvss
CSCsl08519 - FWSM Version 3.2.3 System Software may crash with
Application Layer Protocol Inspection
CVSS Base Score - 7.8
Access Vector - Network
Access Complexity - Low
Authentication - None
Confidentiality Impact - None
Integrity Impact - None
Availability Impact - Complete
CVSS Temporal Score - 6.4
Exploitability - Functional
Remediation Level - Official-Fix
Report Confidence - Confirmed
Impact
======
Successful exploitation of the vulnerability may result in a reload of
the FWSM. Repeated exploitation will result in a sustained denial of
service attack.
Software Versions and Fixes
===========================
When considering software upgrades, consult
http://www.cisco.com/go/psirt and any subsequent advisories to
determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the
devices to be upgraded contain sufficient memory and that current
hardware and software configurations will continue to be supported
properly by the new release. If the information is not clear, contact
the Cisco Technical Assistance Center (TAC) or your contracted
maintenance provider for assistance.
FWSM software version 3.2(4) contains the fixes for the vulnerability
described in this document and will be available for download the week
beginning 31st December 2007.
FWSM software will be available for download from the following
location on cisco.com:
http://www.cisco.com/pcgi-bin/tablebuild.pl/cat6000-fwsm?psrtdcat20e2
Workarounds
===========
* Disable the TCP normalizing function
Disabling the TCP normalizing function in the FWSM will mitigate
this vulnerability.
The TCP normalizer performs the following action: for traffic that
passes through the control-plane path, such as packets that require
Layer 7 inspection or management traffic, the FWSM sets the maximum
number of out-of-order packets that can be queued for a TCP
connection to 2 packets. The TCP normalizer is enabled by default
and is not configurable except to enable or disable.
To disable the TCP normalizing function, use the
"no control-point tcp-normalizer" command in global configuration
mode, as shown in the following example.
FWSM# config terminal
FWSM(config)# no control-point tcp-normalizer
FWSM(config)#
FWSM#
Disabling the "control-point tcp-normalizer" will prevent strict
TCP checks, such as detecting out-of-sequence segments and
monitoring TCP options, on the TCP packets received on the Control
Plane for Layer 7 inspection in the FWSM, will not be performed.
The feature should be re-enabled after upgrading to a fixed version
of software.
Obtaining Fixed Software
========================
Cisco has released free software updates that address these
vulnerabilities. Prior to deploying software, customers should consult
their maintenance provider or check the software for feature set
compatibility and known issues specific to their environment.
Customers may only install and expect support for the feature sets
they have purchased. By installing, downloading, accessing or
otherwise using such software upgrades, customers agree to be bound by
the terms of Cisco's software license terms found at
http://www.cisco.com/en/US/products/prod_warranties_item09186a008088e31f.html
or as otherwise set forth at Cisco.com Downloads at
http://www.cisco.com/public/sw-center/sw-usingswc.shtml
Do not contact psirt@cisco.com or security-alert@cisco.com for
software upgrades.
Customers with Service Contracts
+-------------------------------
Customers with contracts should obtain upgraded software through their
regular update channels. For most customers, this means that upgrades
should be obtained through the Software Center on Cisco's worldwide
website at http://www.cisco.com.
Customers using Third-party Support Organizations
+------------------------------------------------
Customers whose Cisco products are provided or maintained through
prior or existing agreements with third-party support organizations,
such as Cisco Partners, authorized resellers, or service providers
should contact that support organization for guidance and assistance
with the appropriate course of action in regards to this advisory.
The effectiveness of any workaround or fix is dependent on specific
customer situations, such as product mix, network topology, traffic
behavior, and organizational mission. Due to the variety of affected
products and releases, customers should consult with their service
provider or support organization to ensure any applied workaround or
fix is the most appropriate for use in the intended network before it
is deployed.
Customers without Service Contracts
+----------------------------------
Customers who purchase direct from Cisco but do not hold a Cisco
service contract, and customers who purchase through third-party
vendors but are unsuccessful in obtaining fixed software through
their point of sale should acquire upgrades by contacting the Cisco
Technical Assistance Center (TAC). TAC contacts are as follows.
* +1 800 553 2447 (toll free from within North America)
* +1 408 526 7209 (toll call from anywhere in the world)
* e-mail: tac@cisco.com
Customers should have their product serial number available and be
prepared to give the URL of this notice as evidence of entitlement to
a free upgrade. Free upgrades for non-contract customers must be
requested through the TAC.
Refer to http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
for additional TAC contact information, including localized telephone
numbers, and instructions and e-mail addresses for use in various
languages.
Exploitation and Public Announcements
=====================================
This issue was first discovered via internal testing at Cisco. There
are no known instances of intentional exploitation of this issue.
However, Cisco has observed data streams that appear to be
unintentionally triggering the vulnerability.
Status of This Notice: INTERIM
==============================
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY
KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE
INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS
AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS
DOCUMENT AT ANY TIME.
A stand-alone copy or Paraphrase of the text of this document that
omits the distribution URL in the following section is an
uncontrolled copy, and may lack important information or contain
factual errors.
Distribution
============
This advisory is posted on Cisco's worldwide website at:
http://www.cisco.com/warp/public/707/cisco-sa-20071219-fwsm.shtml
In addition to worldwide web posting, a text version of this notice
is clear-signed with the Cisco PSIRT PGP key and is posted to the
following e-mail and Usenet news recipients.
* cust-security-announce@cisco.com
* first-teams@first.org
* bugtraq@securityfocus.com
* vulnwatch@vulnwatch.org
* cisco@spot.colorado.edu
* cisco-nsp@puck.nether.net
* full-disclosure@lists.grok.org.uk
* comp.dcom.sys.cisco@newsgate.cisco.com
Future updates of this advisory, if any, will be placed on Cisco's
worldwide website, but may or may not be actively announced on mailing
lists or newsgroups. Users concerned about this problem are encouraged
to check the above URL for any updates.
Revision History
================
+-----------------------------------------------------------+
| Revision 1.0 | 2007-DECEMBER-19 | Initial public release. |
+-----------------------------------------------------------+
Cisco Security Procedures
=========================
Complete information on reporting security vulnerabilities in Cisco
products, obtaining assistance with security incidents, and
registering to receive security information from Cisco, is available
on Cisco's worldwide website at
http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html
This includes instructions for press inquiries regarding Cisco
security notices. All Cisco security advisories are available at
http://www.cisco.com/go/psirt
- -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFHaUDv86n/Gc8U/uARAvHcAJ9dYJ4/qb39Ts591wBQc2TQrmZoEQCdFAPK
3jgY7lh9LmnGGhdJtyL/Q04=
=G7ty
- -----END PGP SIGNATURE-----
- --------------------------END INCLUDED TEXT--------------------
You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.
NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members. As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.
NOTE: This is only the original release of the security bulletin. It may
not be updated when updates to the original are made. If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.
Contact information for the authors of the original document is included
in the Security Bulletin above. If you have any questions or need further
information, please contact them directly.
Previous advisories and external security bulletins can be retrieved from:
http://www.auscert.org.au/render.html?cid=1980
If you believe that your computer system has been compromised or attacked in
any way, we encourage you to let us know by completing the secure National IT
Incident Reporting Form at:
http://www.auscert.org.au/render.html?it=3192
===========================================================================
Australian Computer Emergency Response Team
The University of Queensland
Brisbane
Qld 4072
Internet Email: auscert@auscert.org.au
Facsimile: (07) 3365 7031
Telephone: (07) 3365 4417 (International: +61 7 3365 4417)
AusCERT personnel answer during Queensland business hours
which are GMT+10:00 (AEST).
On call after hours for member emergencies only.
===========================================================================
-----BEGIN PGP SIGNATURE-----
Comment: http://www.auscert.org.au/render.html?it=1967
iQCVAwUBR2nPuyh9+71yA2DNAQLwVQQAk+wp7girgAi5tCJVDH+OvlxB2D3vBT/w
XyL4M/DpInN3QT/lMSiLfXnOXZW3m1F6rqNa6cXhAhW2+HuirX1Bh/zZ4gafMMBy
yaE2sTRVprUHBgQZSmlp6iQthuFX1tEqSvKMcslJ74WM8rbOthgJduEUuUctF6N4
k5l0hz4DPwc=
=jl3p
-----END PGP SIGNATURE-----