-----BEGIN PGP SIGNED MESSAGE-----
AUSCERT External Security Bulletin Redistribution
ESB-2008.0365 -- [Appliance]
HP Integrity Servers iLO-2 Management Processors (iLO-2 MP),
Denial of Service
9 April 2008
AusCERT Security Bulletin Summary
Product: iLO-2 MP firmware v F.01.58 and prior
iLO-2 MP firmware v T.01.22 and prior
Platform: HP Integrity Server rx2660, rx3600, rx6600
HP Integrity Blade Server bl860c
Impact: Denial of Service
CVE Names: CVE-2008-0711
- --------------------------BEGIN INCLUDED TEXT--------------------
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c01422487
HPSBMA02327 SSRT071455 rev.1 - HP Integrity Servers iLO-2 Management
Processors (iLO-2 MP), Denial of Service (DoS)
NOTICE: The information in this Security Bulletin should be acted upon as
soon as possible.
Release Date: 2008-04-07
Last Updated: 2008-04-07
Potential Security Impact: Denial of Service (DoS)
Source: Hewlett-Packard Company, HP Software Security Response Team
A potential security vulnerability has been identified in the embedded
management console in certain HP Integrity Servers iLO-2 Management
Processors (iLO-2 MP). The vulnerability could be remotely exploited to
cause a Denial of Service (DoS).
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
The following supported software versions are affected:
iLO-2 Management Processors on HP Integrity Servers...
HP Integrity Server model numbers rx2660, rx3600, rx6600 running iLO-2 MP
firmware v F.01.58 and earlier
HP Integrity Blade Server model bl860c running iLO-2 MP firmware v T.01.22
For a PGP signed version of this security bulletin please write to:
CVSS 2.0 Base Metrics
Reference Base Vector Base Score
CVE-2008-0711 (AV:N/AC:L/Au:N/C:N/I:N/A:C) 7.8
Information on CVSS is documented in HP Customer Notice: HPSN-2008-002.
Affected HP Integrity Servers should be updated to the following iLO-2 MP
F.02.17 and later
T.02.17 and later
This resolution will also be included in subsequent firmware revisions.
The HP firmware updates are available at http://www.hp.com/go/bizsupport
* Connect to the HP Support & Drivers home pages at
* Select Download drivers and software.
* In Search products, enter the server model number (for example, rx3600)
and then click >> to begin the search.
* Select the model from the product search results.
* Select the product.
* Select the operating system.
* In the Firmware – System section, locate the latest firmware package
and click Download >> .
* To see the release notes with installation instructions, click on the
package Description and then the Release Notes tab.
* Click on save and select a directory to save the package.
* Follow the installation instructions to complete the firmware update.
PRODUCT SPECIFIC INFORMATION
Version:1 (rev.1) - 7 April 2008 Initial release
Third Party Security Patches: Third party security patches which are to be
installed on systems running HP software products should be applied in
accordance with the customer's patch management policy.
Support: For further information, contact normal HP Services support channel.
Report: To report a potential security vulnerability with any HP supported
product, send Email to: firstname.lastname@example.org
It is strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit information.
To get the security-alert PGP key, please send an e-mail message as follows:
Subject: get key
Subscribe: To initiate a subscription to receive future HP Security Bulletins
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your ITRC security bulletins and patches
- check ALL categories for which alerts are required and continue.
Under Step2: your ITRC operating systems
- verify your operating system selections are checked and save.
To update an existing subscription: http://h30046.www3.hp.com/subSignIn.php
Log in on the web page: Subscriber's choice for Business: sign-in.
On the web page: Subscriber's Choice: your profile summary - use Edit Profile
to update appropriate sections.
To review previously published Security Bulletins visit:
* The Software Product Category that this Security Bulletin relates to is
represented by the 5th and 6th characters of the Bulletin number in the title:
GN = HP General SW
MA = HP Management Agents
MI = Misc. 3rd Party SW
MP = HP MPE/iX
NS = HP NonStop Servers
OV = HP OpenVMS
PI = HP Printing & Imaging
ST = HP Storage SW
TL = HP Trusted Linux
TU = HP Tru64 UNIX
UX = HP-UX
VV = HP VirtualVault
System management and security procedures must be reviewed frequently to
maintain system integrity. HP is continually reviewing and enhancing the
security features of software products to provide customers with current
"HP is broadly distributing this Security Bulletin in order to bring to the
attention of users of the affected HP products the important security
information contained in this Bulletin. HP recommends that all users
determine the applicability of this information to their individual
situations and take appropriate action. HP does not warrant that this
information is necessarily accurate or complete for all user situations
and, consequently, HP will not be responsible for any damages resulting
from user's use or disregard of the information provided in this Bulletin.
To the extent permitted by law, HP disclaims all warranties, either express
or implied, including the warranties of merchantability and fitness for a
particular purpose, title and non-infringement."
©Copyright 2008 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial
errors or omissions contained herein. The information provided is
provided "as is" without warranty of any kind. To the extent permitted by
law, neither HP or its affiliates, subcontractors or suppliers will be
liable for incidental, special or consequential damages including
downtime cost; lost profits; damages relating to the procurement of
substitute products or services; or damages for loss of data, or software
restoration. The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard products
referenced herein are trademarks of Hewlett-Packard Company in the United
States and other countries. Other product and company names mentioned
herein may be trademarks of their respective owners.
- --------------------------END INCLUDED TEXT--------------------
You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to email@example.com
and we will forward your request to the appropriate person.
NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members. As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.
NOTE: This is only the original release of the security bulletin. It may
not be updated when updates to the original are made. If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.
Contact information for the authors of the original document is included
in the Security Bulletin above. If you have any questions or need further
information, please contact them directly.
Previous advisories and external security bulletins can be retrieved from:
If you believe that your computer system has been compromised or attacked in
any way, we encourage you to let us know by completing the secure National IT
Incident Reporting Form at:
Australian Computer Emergency Response Team
The University of Queensland
Internet Email: firstname.lastname@example.org
Facsimile: (07) 3365 7031
Telephone: (07) 3365 4417 (International: +61 7 3365 4417)
AusCERT personnel answer during Queensland business hours
which are GMT+10:00 (AEST).
On call after hours for member emergencies only.
-----BEGIN PGP SIGNATURE-----
-----END PGP SIGNATURE-----