Protect yourself against future threats.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
===========================================================================
AUSCERT External Security Bulletin Redistribution
ESB-2010.0120
SSRT100024 rev.1 - HP Operations Agent Running on Solaris
10, Remote Unauthorized Access
9 February 2010
===========================================================================
AusCERT Security Bulletin Summary
---------------------------------
Product: HP Operations Agent
Publisher: Hewlett-Packard
Operating System: Solaris
Impact/Access: Unauthorised Access -- Remote/Unauthenticated
Resolution: Mitigation
CVE Names: CVE-2010-0444
- --------------------------BEGIN INCLUDED TEXT--------------------
- -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c02002298
Version: 1
HPSBMA02487 SSRT100024 rev.1 - HP Operations Agent Running on Solaris 10,
Remote Unauthorized Access
NOTICE: The information in this Security Bulletin should be acted upon as
soon as possible.
Release Date: 2010-02-08
Last Updated: 2010-02-08
Potential Security Impact: Remote unauthorized access
Source: Hewlett-Packard Company, HP Software Security Response Team
VULNERABILITY SUMMARY
A potential vulnerability has been identified with HP Operations Agent
running on Solaris 10. The vulnerability could be exploited remotely to
gain unauthorized access.
References: CVE-2010-0444
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP Operations Agent 8.51, 8.52, 8.53, 8.60 running on
Solaris 10 (sparc/x86/x64)
BACKGROUND
CVSS 2.0 Base Metrics
===========================================================
Reference Base Vector Base Score
CVE-2010-0444 (AV:N/AC:L/Au:N/C:C/I:C/A:C) 10.0
===========================================================
Information on CVSS is documented
in HP Customer Notice: HPSN-2008-002
RESOLUTION
The vulnerability can be resolved by the following procedure.
Run the following command to identify a vulnerable configuration
/usr/bin/passwd -s opc_op
A vulnerable configuration will return this
opc_op NP
If the configuration is vulnerable run the following command
/usr/bin/passwd -N opc_op
The command in step 1 should now return this
opc_op NL
PRODUCT SPECIFIC INFORMATION
HISTORY
Version:1 (rev.1) - 8 February 2010 Initial release
Third Party Security Patches: Third party security patches that are to be
installed on systems running HP software products should be applied in
accordance with the customer's patch management policy.
Support: For further information, contact normal HP Services support channel.
Report: To report a potential security vulnerability with any HP supported
product, send Email to: security-alert@hp.com
It is strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit information.
To get the security-alert PGP key, please send an e-mail message as follows:
To: security-alert@hp.com
Subject: get key
Subscribe: To initiate a subscription to receive future HP Security
Bulletins via Email:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&langcode=USENG&jumpid=in_SC-GEN__driverITRC&topiccode=ITRC
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your ITRC security bulletins and patches
-check ALL categories for which alerts are required and continue.
Under Step2: your ITRC operating systems
-verify your operating system selections are checked and save.
To update an existing subscription: http://h30046.www3.hp.com/subSignIn.php
Log in on the web page: Subscriber's choice for Business: sign-in.
On the web page: Subscriber's Choice: your profile summary - use Edit
Profile to update appropriate sections.
To review previously published Security Bulletins visit:
http://www.itrc.hp.com/service/cki/secBullArchive.do
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters
of the Bulletin number in the title:
GN = HP General SW
MA = HP Management Agents
MI = Misc. 3rd Party SW
MP = HP MPE/iX
NS = HP NonStop Servers
OV = HP OpenVMS
PI = HP Printing & Imaging
ST = HP Storage SW
TL = HP Trusted Linux
TU = HP Tru64 UNIX
UX = HP-UX
VV = HP VirtualVault
System management and security procedures must be reviewed frequently to
maintain system integrity. HP is continually reviewing and enhancing the
security features of software products to provide customers with current
secure solutions.
"HP is broadly distributing this Security Bulletin in order to bring to the
attention of users of the affected HP products the important security
information contained in this Bulletin. HP recommends that all users
determine the applicability of this information to their individual
situations and take appropriate action. HP does not warrant that this
information is necessarily accurate or complete for all user situations and,
consequently, HP will not be responsible for any damages resulting from
user's use or disregard of the information provided in this Bulletin. To
the extent permitted by law, HP disclaims all warranties, either express
or implied, including the warranties of merchantability and fitness for a
particular purpose, title and non-infringement."
Copyright 2009 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or editorial
errors or omissions contained herein. The information provided is provided
"as is" without warranty of any kind. To the extent permitted by law,
neither HP or its affiliates, subcontractors or suppliers will be liable
for incidental,special or consequential damages including downtime cost;
lost profits;damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration. The
information in this document is subject to change without notice.
Hewlett-Packard Company and the names of Hewlett-Packard products referenced
herein are trademarks of Hewlett-Packard Company in the United States and
other countries. Other product and company names mentioned herein may be
trademarks of their respective owners.
- -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iEYEARECAAYFAktwKBMACgkQ4B86/C0qfVlzwgCgrq29CA3DylcPyJEC2o8gv8u1
tfIAn2O2T6DmoqvmmfvJe6SR1NNfX/u+
=K6jZ
- -----END PGP SIGNATURE-----
- --------------------------END INCLUDED TEXT--------------------
You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.
NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members. As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.
NOTE: This is only the original release of the security bulletin. It may
not be updated when updates to the original are made. If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.
Contact information for the authors of the original document is included
in the Security Bulletin above. If you have any questions or need further
information, please contact them directly.
Previous advisories and external security bulletins can be retrieved from:
http://www.auscert.org.au/render.html?cid=1980
If you believe that your computer system has been compromised or attacked in
any way, we encourage you to let us know by completing the secure National IT
Incident Reporting Form at:
http://www.auscert.org.au/render.html?it=3192
===========================================================================
Australian Computer Emergency Response Team
The University of Queensland
Brisbane
Qld 4072
Internet Email: auscert@auscert.org.au
Facsimile: (07) 3365 7031
Telephone: (07) 3365 4417 (International: +61 7 3365 4417)
AusCERT personnel answer during Queensland business hours
which are GMT+10:00 (AEST).
On call after hours for member emergencies only.
===========================================================================
-----BEGIN PGP SIGNATURE-----
Comment: http://www.auscert.org.au/render.html?it=1967
iD8DBQFLcJBG/iFOrG6YcBERAghFAKC9kj6BruVQp08KbehUABFMYY+iQACaAigx
yQH3vKZwkTxz1a2GHMPjoJ0=
=r5kl
-----END PGP SIGNATURE-----