-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

===========================================================================
             AUSCERT External Security Bulletin Redistribution

                              ESB-2019.0949.2
When authentication is set to require, the Client SSL or Server SSL profile
      does not report an error when it has an associated invalid CRL
                               26 March 2019

===========================================================================

        AusCERT Security Bulletin Summary
        ---------------------------------

Product:           F5 products
Publisher:         F5 Networks
Operating System:  Network Appliance
Impact/Access:     Provide Misleading Information -- Existing Account
Resolution:        Patch/Upgrade

Original Bulletin: 
   https://support.f5.com/csp/article/K15732489

Revision History:  March 26 2019: Added latest advisory update
                   March 22 2019: Initial Release

- --------------------------BEGIN INCLUDED TEXT--------------------

K15732489:When authentication is set to require, the Client SSL or Server SSL profile does not report an error when it has an associated invalid CRL 

Security Advisory

Original Publication Date: 22 Mar, 2019

Latest   Publication Date: 26 Mar, 2019

Security Advisory Description

When authentication is set to require, the Client SSL or Server SSL profile
does not report an error when it has an associated invalid Certificate
Revocation List (CRL).

This issue occurs when all of the following conditions are met:

  o The Client SSL or Server SSL profile is associated with a virtual server.
  o The profile is associated with an invalid CRL that is not signed by a
    trusted Certificate Authority (CA).
  o The CRL issuer has the same subject name as one of the certs in the trusted
    CA.
  o The client or server certificate authentication is set to require.

Impact

An invalid CRL which has not been properly signed may be used.

Symptoms

As a result of this issue, you may encounter the following symptom:

  o An error is not reported for the invalid CRL.

Security Advisory Status

F5 Product Development has assigned ID 654368 to this issue. F5 has confirmed
that this issue exists in the products listed in the Applies to (see versions)
box, located in the upper-right corner of this article. For information about
releases, point releases, or hotfixes that resolve this issue, refer to the
following table.

+------------------+-----------------+----------------------------------------+
|Type of fix       |Fixes introduced |Related articles                        |
|                  |in               |                                        |
+------------------+-----------------+----------------------------------------+
|                  |13.1.0           |                                        |
|Release           |13.0.1           |K2200: Most recent versions of F5       |
|                  |11.6.4           |software                                |
|                  |11.5.9           |                                        |
+------------------+-----------------+----------------------------------------+
|Point release/    |13.0.0 HF1       |K9502: BIG-IP hotfix and point release  |
|hotfix            |12.1.3.4         |matrix                                  |
+------------------+-----------------+----------------------------------------+

Security Advisory Recommended Actions

Workaround

None

Supplemental Information

o K51812227: Understanding Security Advisory versioning
  o K41942608: Overview of AskF5 Security Advisory articles
  o K4602: Overview of the F5 security vulnerability response policy
  o K4918: Overview of the F5 critical issue hotfix policy
  o K9502: BIG-IP hotfix and point release matrix
  o K13123: Managing BIG-IP product hotfixes (11.x - 13.x)
  o K167: Downloading software and firmware from F5
  o K9970: Subscribing to email notifications regarding F5 products

- --------------------------END INCLUDED TEXT--------------------

You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.

NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members.  As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.

NOTE: This is only the original release of the security bulletin.  It may
not be updated when updates to the original are made.  If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.

Contact information for the authors of the original document is included
in the Security Bulletin above.  If you have any questions or need further
information, please contact them directly.

Previous advisories and external security bulletins can be retrieved from:

        https://www.auscert.org.au/bulletins/

===========================================================================
Australian Computer Emergency Response Team
The University of Queensland
Brisbane
Qld 4072

Internet Email: auscert@auscert.org.au
Facsimile:      (07) 3365 7031
Telephone:      (07) 3365 4417 (International: +61 7 3365 4417)
                AusCERT personnel answer during Queensland business hours
                which are GMT+10:00 (AEST).
                On call after hours for member emergencies only.
===========================================================================
-----BEGIN PGP SIGNATURE-----
Comment: http://www.auscert.org.au/render.html?it=1967
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=m0Xs
-----END PGP SIGNATURE-----