Hash: SHA256

             AUSCERT External Security Bulletin Redistribution

   JSA10983 - 2020-01 Security Bulletin: Junos OS: Stateless IP firewall
                filter may fail to evaluate certain packets
                              9 January 2020


        AusCERT Security Bulletin Summary

Product:           Junos OS
Publisher:         Juniper Networks
Operating System:  Juniper
Impact/Access:     Reduced Security -- Remote/Unauthenticated
Resolution:        Patch/Upgrade
CVE Names:         CVE-2020-1604  

Original Bulletin: 

- --------------------------BEGIN INCLUDED TEXT--------------------

2020-01 Security Bulletin: Junos OS: EX4300/EX4600/QFX3500/QFX5100 Series: 
Stateless IP firewall filter may fail to evaluate certain packets 

Article ID  : JSA10983
Last Updated: 08 Jan 2020
Version     : 3.0

Product Affected:
This issue affects Junos OS 14.1X53, 15.1, 16.1, 17.1, 17.2, 17.3, 17.4, 18.1,
18.2. Affected platforms: EX4300 Series, EX4600 Series, QFX3500 Series and
QFX5100 Series.

On EX4300, EX4600, QFX3500, and QFX5100 Series, a vulnerability in the IP
firewall filter component may cause the firewall filter evaluation of certain
packets to fail.

This issue only affects firewall filter evaluation of certain packets destined
to the device Routing Engine (RE).

This issue does not affect the Layer 2 firewall filter evaluation nor does it
affect the Layer 3 firewall filter evaluation destined to connected hosts.

This issue may occur when evaluating both IPv4 or IPv6 packets.

This issue affects Juniper Networks Junos OS:

14.1X53 versions prior to 14.1X53-D12 on QFX5100 Series and EX4600 Series;
14.1X53 versions prior to 14.1X53-D52 on QFX3500 Series;
14.1X53 versions prior to 14.1X53-D48 on EX4300 Series;
15.1 versions prior to 15.1R7-S3 on EX4300 Series;
16.1 versions prior to 16.1R7 on EX4300 Series;
17.1 versions prior to 17.1R3 on EX4300 Series;
17.2 versions prior to 17.2R3 on EX4300 Series;
17.3 versions prior to 17.3R2-S5, 17.3R3 on EX4300 Series;
17.4 versions prior to 17.4R2 on EX4300 Series;
18.1 versions prior to 18.1R3 on EX4300 Series;
18.2 versions prior to 18.2R2 on EX4300 Series.

This issue affects Junos OS device with stateless IPv4 or IPv6 firewall filter

[firewall family inet filter]
[firewall family inet6 filter]

Juniper SIRT is not aware of any malicious exploitation of this vulnerability.

This issue was seen during production usage.

This issue has been assigned CVE-2020-1604 .


For QFX5100 Series and EX4600 Series:

The following software releases have been updated to resolve this specific
issue: 14.1X53-D12 and all subsequent releases.

For QFX3500 Series:

The following software releases have been updated to resolve this specific
issue: 14.1X53-D52 and all subsequent releases.

For EX4300 Series:

The following software releases have been updated to resolve this specific
issue: 14.1X53-D48, 15.1R7-S3, 16.1R7, 17.1R3, 17.2R3, 17.3R2-S5, 17.3R3,
17.4R2, 18.1R3, 18.2R2, 18.3R1 and all subsequent releases.

This issue is being tracked as 1026708 , 1458027 , 1343402 and 1377189 .


There are no known workarounds for this issue.

Software Releases, patches and updates are available at https://www.juniper.net
/support/downloads/ .
Modification History:
2020-01-08: Initial Publication.
CVSS Score:
6.5 (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N)
Severity Level:

- --------------------------END INCLUDED TEXT--------------------

You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.

NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members.  As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.

NOTE: This is only the original release of the security bulletin.  It may
not be updated when updates to the original are made.  If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.

Contact information for the authors of the original document is included
in the Security Bulletin above.  If you have any questions or need further
information, please contact them directly.

Previous advisories and external security bulletins can be retrieved from:


Australian Computer Emergency Response Team
The University of Queensland
Qld 4072

Internet Email: auscert@auscert.org.au
Facsimile:      (07) 3365 7031
Telephone:      (07) 3365 4417 (International: +61 7 3365 4417)
                AusCERT personnel answer during Queensland business hours
                which are GMT+10:00 (AEST).
                On call after hours for member emergencies only.
Comment: http://www.auscert.org.au/render.html?it=1967