Protect yourself against future threats.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
===========================================================================
AUSCERT External Security Bulletin Redistribution
ESB-2005.0631 -- HP Security Bulletin HPSBMA01220
SSRT051005 rev.0 - HP ProLiant DL585 Servers Unauthorized Remote Access
11 August 2005
===========================================================================
AusCERT Security Bulletin Summary
---------------------------------
Product: HP ProLiant DL585
Publisher: Hewlett-Packard
Impact: Inappropriate Access
Access: Remote/Unauthenticated
- --------------------------BEGIN INCLUDED TEXT--------------------
- -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
HP SECURITY BULLETIN
HPSBMA01220 REVISION: 0
SSRT051005 rev.0 - HP ProLiant DL585 Servers Unauthorized Remote
Access
NOTICE:
The information in this Security Bulletin should be acted upon
as soon as possible.
INITIAL RELEASE:
09 August 2005
POTENTIAL SECURITY IMPACT:
Unauthorized remote access
SOURCE:
Hewlett-Packard Company
HP Software Security Response Team
VULNERABILITY SUMMARY:
A potential vulnerability has been identified with the HP ProLiant
DL585 server, where a remote unauthorized user may gain access to
the server controls, when the server is powered down.
REFERENCES:
None
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP ProLiant DL585 Integrated Lights Out (ILO) firmware prior to
version 1.81
BACKGROUND:
RESOLUTION:
Until a new version of the Integrated Lights-Out firmware (version
1.81) for ProLiant DL585 servers is available, HP is providing the
following workaround:
To eliminate this vulnerability until ILO version 1.81 becomes
available, unplug the power cord whenever the server is powered
down. This will prohibit the remote access exploit.
This Bulletin will be updated when version 1.81 of the Integrated
Lights-Out (ILO) firmware becomes available.
BULLETIN REVISION HISTORY:
Initial release
9 August 2005
SUPPORT: For further information, contact normal HP Services
support channel.
REPORT: To report a potential security vulnerability with any HP
supported product, send Email to: security-alert@hp.com. It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To obtain the security-alert PGP key please send an
e-mail message to security-alert@hp.com with the Subject of
'get key' (no quotes).
SUBSCRIBE: To initiate a subscription to receive future HP
Security Bulletins via Email:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&
langcode=USENG&jumpid=in_SC-GEN__driverITRC&topiccode=ITRC
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your IRTC security bulletins and patches
- check ALL categories for which alerts are required and
continue.
Under Step2: your IRTC operating systems
- verify your operating system selections are checked and
save.
To update an existing subscription:
http://h30046.www3.hp.com/subSignIn.php
Log in on the web page
Subscriber's choice for Business: sign-in.
On the Web page:
Subscriber's Choice: your profile summary
- use Edit Profile to update appropriate sections.
To review previously published Security Bulletins visit:
http://itrc.hp.com/service/cki/secBullArchive.do
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters of the
Bulletin number:
GN = HP General SW,
MA = HP Management Agents,
MI = Misc. 3rd party SW,
MP = HP MPE/iX,
NS = HP NonStop Servers,
OV = HP OpenVMS,
PI = HP Printing & Imaging,
ST = HP Storage SW,
TL = HP Trusted Linux,
TU = HP Tru64 UNIX,
UX = HP-UX,
VV = HP Virtual Vault
System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.
"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently, HP
will not be responsible for any damages resulting from user's use
or disregard of the information provided in this Bulletin. To the
extent permitted by law, HP disclaims all warranties, either
express or implied, including the warranties of merchantability
and fitness for a particular purpose, title and non-infringement."
(c)Copyright 2005 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP nor its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
respective owners.
- -----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
iQA/AwUBQvnnTuAfOvwtKn1ZEQLh+QCg+TvrBmAjUg4lMAbycoIu7l9UYPMAoM57
/kbYTISrTh0046X7hgqW6rKY
=oODq
- -----END PGP SIGNATURE-----
- --------------------------END INCLUDED TEXT--------------------
You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.
NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members. As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.
NOTE: This is only the original release of the security bulletin. It may
not be updated when updates to the original are made. If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.
Contact information for the authors of the original document is included
in the Security Bulletin above. If you have any questions or need further
information, please contact them directly.
Previous advisories and external security bulletins can be retrieved from:
http://www.auscert.org.au/render.html?cid=1980
If you believe that your computer system has been compromised or attacked in
any way, we encourage you to let us know by completing the secure National IT
Incident Reporting Form at:
http://www.auscert.org.au/render.html?it=3192
===========================================================================
Australian Computer Emergency Response Team
The University of Queensland
Brisbane
Qld 4072
Internet Email: auscert@auscert.org.au
Facsimile: (07) 3365 7031
Telephone: (07) 3365 4417 (International: +61 7 3365 4417)
AusCERT personnel answer during Queensland business hours
which are GMT+10:00 (AEST).
On call after hours for member emergencies only.
===========================================================================
-----BEGIN PGP SIGNATURE-----
Comment: http://www.auscert.org.au/render.html?it=1967
iQCVAwUBQvqzSSh9+71yA2DNAQJnFgP+PpUR83TUyv57sV4p7RSbxkItddg8ED16
bivqmTslnf6KVP0wyRPfqIv2BYiZpIJIg40MzRGxGpSldfwTPCZjFT4gamcf1XOF
nIp3D/xmsDJoaaSgmmrIS3jq85cka+k81AQk8wEVNp70ThGcn+3WdJtuOxnjDYSv
UpfZYXT5z9k=
=dLQm
-----END PGP SIGNATURE-----